Reference: Drz_riditek_01
HANDLEBAR RISERS FOR SUPERMOTO PERIMETRAL TRIPLE CLAMPS
The kit fits handlebar Ø28mm and are available in three different heights: 33, 43 and 53mm.
In stock
- There are no more items in your cart
- Shipping
- Total 0.00 €
-
Banner
Supermoto fork feet - single break system (108mm)
Rating
Modularity is the center of the COBRA fork feet project and it's the feature that, simply by replacing the brackets of the calipers, allows to switch from a single disc to a twin discs brake system without having to replace fork feet. It also allows you to switch from diameter 240mm discs to 260mm and vice versa.
Description
WARNING:
- the kit is designed to be used together with triple clamps 200 or 198mm wide
- the kit doesn't include the hub spacers
Cobra combined all these features together with 25mm reduced offset compared to the motocross fork feet and with a fork guards fixing system that limits the eventuality of ripping when the hole-shot device is operative, or after a crash or a fall.
The wheel axle clamping screws aim toward the outside, this to allow an easy intervention when the front wheel must be removed.
Both the fork feet and the caliper brackets are machined from solid Ergal 7075 T6 with black hard anodising as finishing.
The fork feet for 108mm caliper are available for these fork models:
- WP 48 X-act air MY2015-20 (offset 25mm)
- WP 48 X-act air MY2021 (offset 25mm)
- KYB 48 Yamaha (offset 25mm)
- Showa 49 (offset 25mm)
- Ohlins 48 (offset 25mm)
- Marzocchi 50 (offset 25mm)
The kit includes:
- 2 fork feet offset 25mm
- 1 bracket for 108mm caliper
- 2 fork guards connections
- 1 front wheel axle diameter 25mm
Product Details
FEET_SINGL_01
8 other products in the same category:
Reference: MX-LINE01
Suter clutch MX-LINE
SuterClutch MX-LINE are without anti-hopping technology. These Clutches are great product from many point of view. In MX Sports, the clutch is a vital tool for the riders to control the bike. Not only for starting performance - the clutch is used all around the track to control the bike over bumps, into corners, out of corners, at take off for jumps and...
In stock
Reference: voditko_01
Chain guide for Supermoto
A specially developed chain guide made of strong and flexible material supporting the chain guide and protecting the swingarm.
In stock
Reference: X10 ECU
Fuel & Ignition Control (ECU) - X10 ECU - VORTEX
The ECU is controlling not only Spark timing and Voltage output but also Fuel Mapping and other engine management functions. The result is more power, better power, easier starting and ultimately faster lap times. This unit comes pre-programmed with 10 Performance Fuel & Spark timing maps as well as having 3 additional switches for user trimming of...
In stock
Reference: Cobra_2_kotouc
Break disk for supermoto twin discs brake system
Made in collaboration with Grimeca, world leader in manufacturing hi-tech components for both original and aftermarket motorcycles.By combining our track experience with the great skills and know-how of Grimeca R&D department, we have jointly defined a specific and hi-end product for the Supermoto.The kit includes:2 brake discs12 screws to secure the...
In stock
Reference: crf_250_rx_enduro_25
CRF 250RX ENDURO 2025
Improved cornering stability on rough surfaces – without losing steering agility. That’s exactly what the new 2025 Honda CRF250RX delivers, fully prepped for demanding off-road conditions.
In stock
Reference: crf_300_rx_enduro_25
CRF 300RX ENDURO 2025
Honda once again pushes the limits. The all-new CRF300RX 2025 delivers improved cornering stability over rough terrain while maintaining agile steering. Developed with input from the HRC factory team, it features a new frame, upgraded chassis, and a refined engine.
In stock
Reference: BTL-LINE01
Suter clutch BTL-LINE
"The BTL (Back Torque Limiter) SuterClutch was specifically developed to improve lap times while reducing the physical effort required by the rider. It can be simply and easily adjusted to different conditions and rider styles. It reduces the strain on all components including the gearbox, prevents over-revving of the engine and maximizes the suspension...
In stock
Modularity is the center of the COBRA fork feet project and it's the feature that, simply by replacing the brackets of the calipers, allows to switch from a single disc to a twin discs brake system without having to replace fork feet. It also allows you to switch from diameter 240mm discs to 260mm and vice versa.